天花减振器

Ceiling Vibration Damper Type ⅱ

Purpose and Construction

This product is suitable for ceiling vibration reduction and noise reduction

Features

This product is used for ceiling vibration reduction and noise reduction.

It is installed under the original floor slab using pull-out screws.

It is the load-bearing component of the sound insulation layer and

it is also the core component of the sound insulation bridge.

Main Technical Parameters

The following parameters are typical values for this series of products but not guaranteed values. The test values corresponding to specific models and specifications of products may be different.

No.	Project Name	Typical Value	Remark
1	Suspension stiffness	45N/mm
2	Hanging weight limit	50kg
3	Recommended hanging weight	15~30kg
4	System fixed frequency budget	6~9Hz
5	Spring material	alloy steel
6	Vibration-damping rubber parts	High damping rubber

Note: The technical parameters can be adjusted according to the specific requirements of customers.

Packaging

Product specifications can be customized according to user's specific requirements. Generally, it is packed in plastic bags and then in ordinary cartons. Other feasible packaging can also be formulated according to customer's requirements.

Storage

Store in a ventilated and cool environment, waterproof and moisture-proof, avoid direct sunlight and strong artificial light, and avoid storing together with chemicals such as organic solvents.